MANUAL J
LOAD CALCULATION SERVICE
LICENSED – FAST – CONVENIENT
Sensible (related to temperature)
MANUAL J CALCULATION:
THE ULTIMATE AIR CONDITIONER SIZING SERVICE
Manual J is the ACCA (Air Conditioner Contractors of America) approved method of calculating
room-by-room and whole house cooling loads.
Have you ever struggled with getting the temperature at home just right?
Too Hot, Too Cold?
If that sounds familiar, well… chances are your Air Conditioning & Heating System was NOT sized Properly.
In fact, most older A/C Systems are oversized, so just replacing a 10- to 15-year-old Heating & Air Conditioning System with a properly sized one can save you as much as 30-40% on your Energy bill!
That’s right!
A little extra cash in your pocket and a whole lot of family comfort.
However, the only accurate method to perform air conditioning sizing in a particular home, is to calculate the actual heating or cooling load on the property. A calculation professionally referred to in the Construction Industry as a Manual J based load analysis.
Any Air Conditioning & Heating system not only consumes vast amounts of a home’s total energy budget, but also impacts the comfort and well-being of the occupants more than any other system in a house. Since A/C systems play such a large role in a home’s performance, it’s important that they receive enough “design” attention to make sure they’ll perform the best way possible.
WHAT SPECIFIC INFORMATION WILL AN ACCA MANUAL J PROVIDE ABOUT MY HOME?
Manual J Calculations Are Used To Determine The Amount Of Heat The House Loses In Winter And Gains In Summer.
Manual J: A/C Load Calculations may be done room-by-room for the whole house, which allows you to determine how much conditioned air, in cubic feet per minute CFM each room needs for both heating and cooling.
It factors in all the surfaces of the building envelope, with their areas and insulation levels. Each wall is given its proper orientation, as well as the windows and doors attached to them.
Additional important data to include is the location and tightness of the duct system, the infiltration rate of the house, the internal loads (appliances and people), and area where the house is located.
The results specify the BTUH of heat lost by each room in the winter and gained in the summer.
The results specify the BTUH of heat lost by each room in the winter and gained in the summer.
THE HEAT GAIN IS SPLIT INTO TWO PARTS:
AVOID OVER SIZED A/C SYSTEMS
Get Your Home Air Conditioning Calculation Properly Done, Right From The Start!
ACCA developed its Manual J protocol for heating and cooling load calculations to help HVAC contractors put in correctly sized equipment, but there are a couple of problems:
-
-
- First: most contractors don’t do the load calculations for every new piece of equipment they install. They use rules of thumb instead.
- Second: when they do the Manual J, they sometimes don’t do them correctly.
-
We’ve looked over a lot of Manual J reports because the ENERGY STAR homes program actually requires them.
ENERGY STAR doesn’t require a whole lot. Mainly they want to check that the following info is correct:
-
- Location
- Outdoor & Indoor design temperature
- Orientation
- Windows
- Number of People
- Ducts
IN SUMMARY
Get a Manual J HVAC Load Calculation done by an HVAC professional
A typical Manual J report will provide you with important information regarding the heating & cooling requirements for eachfloor of your home.
A precise Manual J HVAC load calculation is the starting point to any Heating or Air Conditioning System installation or replacement.
A typical Manual J report will provide you with important information regarding the heating & cooling requirements for eachfloor of your home.
ARE YOU A CONTRACTOR? CLICK HERE…
ARE YOU AN ARCHITECT OR AN ENGINEER? CLICK HERE…
OR CALL US NOW AT 1-800-810-3280
OUR MANUAL J CALCULATION SERVICE
Manual J Calculations Are Used To Determine The Amount Of Heat The House Loses In Winter And Gains In Summer.
WHAT MAKES US DIFFERENT
HVAC EXPERT TEAM
Our Calculation Team includes HVAC Licensed contractors with 30 years+ experience & Wrightsoft HVAC Calculation Certified Training.
APPROVED SOFTWARE
Our experienced team uses Wrightsoft© (An ACCA Partner company since 1986) for all Manual J Calculations.
FAST TURNAROUND
Manual J’s are usually completed between 1-2 business days upon receipt of all information required on the home.
UP 2 REVISIONS
If you need to make any modifications to your project, we give you up to 2 minor revisions to the final Manual J.
HOW IT WORKS
MANUAL J CALCULATION PRICES
Manual J Calculation for Existing Residential Homes or New Construction Projects.
- WHOLE HOUSE HEAT LOAD CALCULATION
- 79.00
- Manual J – HVAC Whole House Load Calculation for Residential New Installation
One System Included. Additional systems generate additional charges.
Cannot be upgraded to a Room By Room calculation once the calculation has been performed.
- Up to 2 Minor Revisions Revisions
- 1 Business Day Usual Turnaround Time Time
- +$79.00
Each Additional System after the 1st one. - 800-810-3280 – Call Us Today to Order!
- CHANGEOUT ROOM BY ROOM CALCULATION
- 129.00
- Manual J – HVAC Room By Room Load Calculation for Residential Changeout Installation.
One System Included. Additional systems generate additional charges.
- Up to 2 Minor Revisions Revisions
- 1-2 Business Days Usual Turnaround Time Time
- +$99.00
Each Additional System after the 1st one. - 800-810-3280 – Call Us Today to Order!
- NEW INSTALL ROOM BY ROOM CALCULATION
- 129.00
- Manual J – HVAC Room By Room Load Calculation for Residential New Installation
One System Included. Additional systems generate additional charges.
- Up to 2 Minor Revisions Revisions
- 1-2 Business Days Usual Turnaround Time Time
- +$99.00
Each Additional System after the 1st one. - 800-810-3280 – Call Us Today to Order!
MANUAL J – SAMPLE FILE
Download a full sample of what your Manual J will look like.
ABOUT US
At Webreps, we can facilitate any project from concept to implementation.
Our Heat Load Calculation team is dedicated to staying ahead of the curve and continually update versions and resources. With our unique skill-set and perspective we are able to solve any issues that may arise. We are a service driven organization and realize our customers needs are the most important.
OUR TEAM
Leave it to the Professionals
CRAIG
SR. BUILDING ANALYST
Craig has more than 30 years experience in the HVAC industry. He is a State licensed contractor with an A A S Degree in HVAC. His many years of field experience as well as design experience makes him ideal to help you with your design process.
JOSH
DESIGN TECHNICIAN
Josh has an A.S. Degree in Air Conditioning & Refrigeration, 12+ years Experience in the HVAC industry & 3+ Years performing Manual J Calculations
ANDY
Architect
Andy has a Bachelor in Architecture with 3+ years experience with Autocad and other Architectural Drawing & 3d Modeling Software.
KEN
DESIGN PROFESSIONAL
35+ years in the HVAC industry, having experience in all aspects from installation and service to training other technicians. Hiram posses the skills necessary to deliver an exceptional finished product.
JOSH
DESIGN TECHNICIAN
40+ years in the HVAC industry. Familiar and had practical experience with all aspects of heating and Air Conditioning from design to installation.
MANUAL J CALC. ONLINE REQUEST FORM
Please fill out this form and submit electronically to WebReps, or call us today at 800-810-3280 Email: manualj@webrepsusa.com.
This is a paid service that will be charged according to our service fees. To review our pricing [Click Here…]
Loading
CONTACT
We thank you for visiting our Website and for your interest in our service.
We do appreciate your business.
Our service is nationwide to all States in the United States of America.
itsupport@WebrepsUSA.com
Phone 800-810-3280
800-810-3280
itsupport@webrepsusa.com
WebREPS, LLC
1880 82nd Avenue – Suite 203
Vero Beach, FL 32966